Polar3D - Archive

How to Read A Calibration Key
Do your parts seem a bit off? Lines not quite straight? Here's a guide on how to read a calibration key and get things back in working order.
Fri, 13 Jan, 2017 at 4:28 PM
Getting Started V2 - Initial Setup of the Polar 3D Printer (Serial number P3D02000 and Above)
Click here to access the Getting Started Guide
Tue, 7 Mar, 2017 at 2:16 PM
Printing over USB with Polar Printers
Attached are the Simplify 3D FFF profiles. Polar 1.0 Printers can be connected via USB. Make sure you have the Silicon Labs Drivers (found here), and co...
Fri, 12 Jan, 2018 at 11:15 AM
Polar PLA Material Safety Data Sheets (MSDS)
Please see attached.
Wed, 29 Mar, 2017 at 7:16 PM
How to Reset Networks?
If the printer is booting but you can't access it, you might want to reset the networks. On newer Software (10.11 is confirmed to work) you can res...
Thu, 5 Apr, 2018 at 3:07 PM
Polar Care & LTD Warranty
See attached.
Wed, 29 Mar, 2017 at 7:17 PM
Connecting your Polar3D to your WiFi Network
The Polar3D's indicator lights will tell you what status the printer is in. If the 3D is showing blue, that means your printer is in "Local Hotspo...
Wed, 28 Mar, 2018 at 4:05 PM
Other Safety Reports
Other safety reports are available by request: please email support@polar3d.com with subject line "GDrive Safety Docs" RoHS Report FCC Gr...
Wed, 14 Mar, 2018 at 7:31 PM