Polar3D - Archive

Z Homing Issues - Testing the Z Endstop Board
The printer is told it has "Homed" in the Z axis by bringing the nozzle down to the plate and pressing the nozzle against the plate. This pushes t...
Wed, 28 Mar, 2018 at 3:49 PM
Broken Z-Tube Replacement Guide
If your Z-Axis tube is broken click HERE to learn how to replace it.
Wed, 25 Jan, 2017 at 3:07 PM
Loading and Unloading Filament
Click HERE for a guide for loading and unloading filament.
Wed, 1 Feb, 2017 at 4:35 PM
Replacing the Daughter Board
Click HERE to learn how to replace the Daughter Board on your Polar 3D Printer. 
Mon, 13 Feb, 2017 at 11:08 AM
Reading the Calibration Key
Click HERE to learn how to read the Calibration Key object, in order to assess your calibration
Wed, 15 Feb, 2017 at 3:10 PM
Reflashing The SD Card or Manually Updating Your Printer's Software
Note: Only for Printers with serial number between P3D00100 and P3D01999. Doing so without the advice/counsel of our support team or on any machines outside...
Wed, 7 Mar, 2018 at 2:39 PM
My nozzle tries to smash into the plate / go through the plate
The printer is told it has "Homed" in the Z axis by bringing the nozzle down to the plate and pressing the nozzle against the plate. This pushes t...
Thu, 15 Mar, 2018 at 12:15 PM
How to Update Your Polar 3D Printer
YouTube - How to Update Your Polar 3D Printer Updates to the Printer Software and Firmware come out every so often, here's how to make sure you...
Wed, 14 Mar, 2018 at 10:50 PM
Connection Woes
Polar 3D Connection Woes This article only applies to printers with serial numbers at and before P3D01999 Unplug ethernet and  USB if either are ...
Mon, 12 Mar, 2018 at 5:24 PM
Anatomy of a Polar 2.0 Printer
PDF - Polar Identification Photos
Fri, 6 Apr, 2018 at 9:29 AM