Polar3D - Archive

Removing and Replacing the Feed Block
This link will walk you through removing and putting on the feed block. https://docs.google.com/document/d/1X89krkqCM1896ZKYi4sqD4EqdasLExLayiHWiaz2ISc/edit
Wed, 11 Jan, 2017 at 5:02 PM
Replacing the Feed Block
The feed block is the milled aluminum piece that sits atop the extruder assembly. The filament enters the hole in the top of the feed block and is pres...
Wed, 7 Mar, 2018 at 2:36 PM
Broken Z-Tube Replacement Guide
If your Z-Axis tube is broken click HERE to learn how to replace it.
Wed, 25 Jan, 2017 at 3:08 PM
Replacing the SD Card
Have you recieved a new SD Card, or reflashed your SD Card? If so click HERE for instructions on how to replace the SD Card.
Wed, 25 Jan, 2017 at 2:45 PM
Broken Z-Tube Replacement Guide
If your Z-Axis tube is broken click HERE to learn how to replace it.
Wed, 25 Jan, 2017 at 3:07 PM
Loading and Unloading Filament
Click HERE for a guide to loading and unloading filament. 
Wed, 1 Feb, 2017 at 4:33 PM
Replacing the Fan in the Back of the Printer
Click HERE for the full document. Replacing the Fan The fan on our first generation printer keeps the daughterboard from overheating. The printer will...
Wed, 7 Mar, 2018 at 2:41 PM
Loading and Unloading Filament
Click HERE for a guide for loading and unloading filament.
Wed, 1 Feb, 2017 at 4:34 PM
REPAIR - Bad Z Mosfet in Printrboard - M119 Will Not Trigger
Note: Please ONLY complete these steps if counseled to do so by our support team. This fix is only needed in certain circumstances. Note: If your firmwa...
Thu, 15 Mar, 2018 at 12:10 PM
Camera Replacement
Click HERE to learn how to properly replace the camera on your printer.
Wed, 25 Jan, 2017 at 2:52 PM