Dremel 3D45

Dremel 3D45 - Owners Manual
Click here (or the photo above) for the Owners Manual that came with your Dremel Digilab 3D45.
Thu, 5 Apr, 2018 at 9:40 PM
Getting Started
Please note: this video is a great resource for you up until 2:00 minutes in. If you plan to use your Dremel via the Polar Cloud, your steps will di...
Mon, 9 Apr, 2018 at 5:40 PM
How to Add your Dremel Digilab 3D45 to the Polar Cloud
Thu, 5 Apr, 2018 at 9:34 PM
How do I prep and maintain my Dremel's build plate?
Naturally - 3D Printing polymers want to warp upwards when they cool. To prevent this, we apply something to the build surface before printing. In this case...
Mon, 9 Apr, 2018 at 5:31 PM
How do I remove my Dremel's build plate?
The Dremel's build plate is borosilicate glass surrounded by a hard rubbery blue plastic. The plate is secured at the back by two static metal clips, a...
Mon, 9 Apr, 2018 at 5:34 PM
How Do I Clean the Dremel's Build Plate?
Before going into details on how to clean the build plate - please know that you can print successfully on a pretty cloudy, rough (with glue), build plate. ...
Mon, 9 Apr, 2018 at 5:30 PM
Firmware Update - Dremel 3D45 Digilab
Needed: Current FW: https://drive.google.com/file/d/1eX4-uWoSAxdXM95JmtLcSUWawhoC8jHO Blank USB Flash Drive (1gb or more) This will be outlined ...
Fri, 17 Aug, 2018 at 2:10 PM
What's the correct way to work with my Dremel's Print Settings/Filament?
Dremel filament includes an RFID chip that tells the machine what filament you're printing with. This is convenient for some but a headache for others....
Wed, 23 May, 2018 at 4:31 PM
Can I Use 3rd Party (non-Dremel) filament?
Yes! Our Community Objects page has a "3rd party spool holder" for the Dremel 3D45. Click the photo or link below to reach it directly, or you...
Mon, 9 Apr, 2018 at 5:39 PM