Flashforge Inventor II & Inventor IIS

How do I add my Inventor II or IIS to the Cloud?
Flashforge Inventor II The Flashforge Inventor II is Polar Cloud Enabled! Adding the Inventor II to the Polar Cloud gives you the ...
Wed, 12 Dec, 2018 at 1:59 PM
How to Update the Firmware on your Inventor II or Inventor IIS
We're hard at work improving the user experience for the Flashforge Inventor II(S). Please periodically check to see that you're running the lates...
Tue, 3 Mar, 2020 at 9:11 AM
I just got my Inventor. How do I get started? (unboxing, loading, leveling)
Congratulations on the purchase of your new Polar Cloud enabled Flashforge Inventor II(s)! First, remove it from the box and familiarize yourself with w...
Thu, 15 Mar, 2018 at 12:02 PM
Flashforge Build Plate "Leveling" - Never Reaches Probe
Some have had issues when leveling the bed via the LCD screen. We've seen this happen when all of the thumbwheels under the bed are fully tightened ...
Wed, 7 Mar, 2018 at 1:49 PM
How to Use Ethernet with your Inventor II
The Flashforge Inventor II does not have an onboard ethernet port. From the factory, your only option is to use WiFi. If you're a school that prefe...
Mon, 12 Mar, 2018 at 11:51 AM
Where can I find the Quickstart, User Guide, and More Support info for the Flashforge Inventor II?
Much of this is handled well over on Flashforge's support website. Click the photo before for more info.
Wed, 14 Mar, 2018 at 10:45 PM
How Do I Remove the Build Plate?
Grab by the logo and... voilá! If you're having trouble removing the part from the plate, you can try removing it with a paint scraper a...
Wed, 14 Mar, 2018 at 3:37 PM
My Inventor Won't Turn On!
Let's start from the wall out let and work towards the printer. First (and you should always do this) make sure you're using the power supply ...
Wed, 14 Mar, 2018 at 3:38 PM
My Inventor's LCD Screen becomes unresponsive.
There are two scenarios where users are affected here. My screen is unresponsive from the second I turn the printer on: Did you just do a Firmware upda...
Wed, 14 Mar, 2018 at 3:40 PM
Can I use other brands of PLA Filament with my Inventor?
Yes! The Flashforge Inventor II(s) will extrude any 1.75mm diameter PLA 3D Printer filament. As with any printer or filament, mind the golden rules - cheape...
Fri, 9 Nov, 2018 at 6:39 PM