Polar3D Hardware: P3D02150 and Higher

Broken Z-Tube Replacement Guide
If your Z-Axis tube is broken click HERE to learn how to replace it.
Wed, 25 Jan, 2017 at 3:08 PM
Loading and Unloading Filament
Click HERE for a guide to loading and unloading filament. 
Wed, 1 Feb, 2017 at 4:33 PM
REPAIR - Bad Z Mosfet in Printrboard - M119 Will Not Trigger
Note: Please ONLY complete these steps if counseled to do so by our support team. This fix is only needed in certain circumstances. Note: If your firmwa...
Thu, 15 Mar, 2018 at 12:10 PM
Z Homing Issues - Testing the Z Endstop Board
The printer is told it has "Homed" in the Z axis by bringing the nozzle down to the plate and pressing the nozzle against the plate. This pushes t...
Wed, 28 Mar, 2018 at 3:49 PM
Loading and Unloading Filament
Click HERE for a guide for loading and unloading filament.
Wed, 1 Feb, 2017 at 4:35 PM
My nozzle tries to smash into the plate / go through the plate
The printer is told it has "Homed" in the Z axis by bringing the nozzle down to the plate and pressing the nozzle against the plate. This pushes t...
Thu, 15 Mar, 2018 at 12:15 PM
Anatomy of a Polar 2.0 Printer
PDF - Polar Identification Photos
Fri, 6 Apr, 2018 at 9:29 AM