Start a new topic

Skipping during print

If I try and print the 'Elevate' Phone Stand "" using 'medium' resolution and after changing settings so the supports would stick to the build plate (raft is your friend), I found that the Polar3D would skip occasionally during the print.  Fortunately, I was beside it, paused the print and found that carefully rotating it 1-2 teeth to the left or right and resuming saved the print and everything was back inline.

Is there/should there be a setting to reduce the rotational speed so this skipping does not occur?  

1 Comment

I spoke with Mike and he suggested that changing the 'Move Speed' in from the Cloud (Cura Settings > Advanced) from 100 to perhaps 70 may help prevent the over acceleration that would lead to skipping.

Login or Signup to post a comment