Start a new topic

Buy an extra buildplate

If you do not already have a second buildplate you will benefit greatly from having one. 

As I finish a print I simply switch my buildplate for one that has been sprayed with hairspray and is cured and ready to go. I have saved a ton of time in prep time and saved a ton of wasted filament due to poor adhesion. 

1 person has this question

Due to manufacturing issues, I know some build plates were slightly different thicknesses.  There was enough variation to cause calibration concerns.  That was supposed to be addressed in the past few weeks.  Is this still a concern?  Can build plates be swapped simply now?

I haven't had any issues with switching mine back and forth.

Great news! - I didn't see that they were just $10 in the store.  I've nearly dropped mine a dozen times in the first week of having it!

Just got new build plates in - Will be testing as soon as my replacement power supply is delivered (the first one lasted just 6 days...)

Thank you so much for this. I was into this issue and tired to tinker around to check if its possible but couldnt get it done. Now that i have seen the way you did it, thanks guys



Login or Signup to post a comment